Today's model ensures the highest protection against the hostile environment within which the fire-fighter works. Specifically designed and constructed for structural fire fighting activities. Extra protection Comfort and flexibility due to ergonomic shape and Kevlar® - mineral lining that surrounds your hands. Water resistant breathable membrane makes a barrier against bacteria, blood and chemicals. When gloves tear resistance is equal to level 4 it can be a hazard if there is a possibility they could snag into moving parts and put the user in danger.

All components and manufacturing - EU.

Specification

PBI® - upper part cut, abrasion, puncture and flame protection

High-quality leather shell - natural protection against mechanical and thermal risk

Kevlar®/mineral fibre lining for cut protection

The leather will not harden after being wet

Reinforcements - in knuckle and palm parts

Membrane - breathable barrier against bacteria, blood and chemicals

Ergonomic shape - pre-curved fingers

High sensitivity

Easy on/off even when wet

Materials

Shell - Palm part - Specially tanned split leather

Upper part – PBI®

Liner - Palm part - Kevlar®/mineral fibres

Upper part - Protex M^TM/Fireblocker

Standards

The gloves B0911 are made in accordance with Directive 89/686/EEC and satisfy the following latest norms:

EN 420:2003+A1:2009 Protective gloves - General requirements and test methods

EN 388:2003 Protective gloves against mechanical risks

EN 407:2004 Protective gloves against thermal risks (heat and/or fire)

EN 659:2003+A1:2008 Protective gloves for firefighters

The gloves don't consist of any allergic components.

Certificate

Certificate

CE 0493Centexbel Certified

GLOVE SIZING AND FITTING

Sizing and fitting of the gloves should be conducted in conjunction with a sizing chart provided by the supplier.

Alternatively for more accurate sizing use the following method.

1. Extend your hand flat.
2. With a tailor's measuring tape, wrap it around the hand just below the knuckles and fingers, but above and not around the thumb. This will give you an inch measurement.
3. Apply the figures to the sizes on the table below. If your hand measures between sizes, order the larger size. Granqvists can also manufacture gloves to additional sizes or modifications on request.

Once correctly sized and fitted (Sizes are standard European from 6 to 12) the gloves are designed to interface with modern firefighting coats and tunics with the sleeve of the glove covering the inner sleeve or cuff of the coat or tunic by pulling on the leather tab of the glove cuff, completely covering the tunic or coat inner sleeve. The outer cuff of the coat or tunic should then sit over the top of the glove cuff, affording the wearer maximum protection and comfort.

Additional arterial protection is afforded to the wearer by the design and materials used in the cuff.

Downloads

Analysis Report  - b0911_analysis_report_-_gloves_2010.pdf

BVQi 9001 Certificate - BVQI9001Engelsk.pdf

BVQi 14001 Certificate - BVQI14001 Engelsk.pdf

CE TYPE EXAMINATION Certificate - ce_b0911_gold_grip.pdf

Glove Size Chart - Glovesizechart.pdf

ISO Certificate 9001 - 14001 - ISOcertyfikates900114001.pdf

Gold Grip Brochure - kartaGoldGrip.pdf